Legacy in every detail.

Our creations are not produced they’re crafted, slowly and soulfully, to last generations.

At Frazer and Haws, every piece begins with a feeling—not a form. Our silver isn’t mass-produced or machine-polished—it is patiently hand-sculpted, etched with intention, and brought to life by master artisans who have dedicated their lives to this sacred craft.

Crafted with Generations of Skill

Every Frazer and Haws creation is made using 92.5% pure Sterling silver hallmarked and certified for authenticity. It guarantees quality, protects against fraud, and ensures the silver meets established purity standards.

01 Image

Craftsmen

Frazer and Haws' craftsmen are from families of sixth or seventh generation goldsmiths and silversmiths. Our workshop equipped with state-of-art tools produces products that meet tough international standards with ease.

02 Image

Silver In Its Raw Form

Silver comes to the factory in the form of solid bricks of 99.9% purity. This is melted in a furnace and mixed with the imported alloy to bring the silver to 92.5% purity, of international standard.

03 Image

Sheet Making

Frazer and Haws draws its own sheets to control the thickness which sometimes is as thin as 0.6mm. This is only used when silver sheets are required to cover a small area. Most sheets are 2-3mm, going up to 5mm (cutlery). Anything less makes the silver very tinny and dents easily.

04 Image

Design

With a qualified in-house design team, Frazer and Haws stands head and shoulders above all others silversmiths. All F&H designs are original. Carefully drawn on cartridge sheets, the drawings are detailed with side, front and top dimensions.

05 Image

Casting Process

Investment casting process reduces porosity and provides precise replicas. Sand casting, which is used by the masses results in trapped gases and other impurities resulting in an uneven product. People generally use sand casting as it is cheaper and fester but they do so at the cost of quality, which is where F&H does not compromise.

06 Image

Die Making and Punching

When crafting objects in larger numbers it is important to work with 'dies' to ensure uniformity. After creating a 'master’ - a die is first made in die steel, which is put on special machines with the silver sheet to punch out the requisite shape.

07 Image

Solders

Generally silversmiths in India use lead solders which could be poisonous. Besides being bad for one’s health it is heavier, therefore, the weight of the silver article goes up. Frazer and Haws, on the other hand uses only silver solders that adhere to the international norms.

08 Image

Chasing

In this process the chaser makes a wooden block, puts on shellac and the sheet is pressed on it at the right temperature, so that it adheres to it. The exact detail of the design are first made using a sharp tool. The sheet then goes through an extensive process of hammering from the front as well as the back using a variety of punches, chisels and hammers.

09 Image

Etching

To get any fine details or intricate design on a product as also to provide branding for corporates, F&H has an exclusive team for etching and engraving. We use the acid etching process whereby the design is transferred on to the silver product.

10 Image

Engraving

Engraving is used to add detail and design in a product. The design to be engraved is transferred on to the product by drawing with one's hands or by tracing the design on to the product from paper. Then, with extra sharp tools called "bullys" the design detail is physically etched out.

11 Image

Piercing

One of the most eye catching and attractive work is 'PIERCING'. In this process the design is traced out on the product by hand. Then the 'master piercers' get to work. Using fret saws with imported blades they saw out the design with an eye on detail. Frazer and Haws has many skilled 'master piercers'.

12 Image

Spinning

Spinning is an integral part of a silver manufacturing unit. Frazer and Haws has a number of spinning Lathe machines as also artisans to operate them. Using dies and appropriate tools the spinning masters spin out products like diyas, bowls and vases.

13 Image

Surface Finishes & Textures

Through constant R&D, our designers and master craftspersons have been able to change the plain looking and uni-dimensional finish of the usual silver to different finishes like 'rice hammered', 'round hammered','triangular hammered', matte and satin among others.

14 Image

Finishing Process

Water has to be dried with soft muslin cloth so that no water remarks remain. Then it is dipped into a clear lacquer solution, and dried in a dust free environment in a 100°C, dust free chamber.

15 Image

Stone

A large number of Frazer and Haws unique products have an element of stone in them. Hence a strong team of stone cutters and polishers is maintained who work with marble, granite and softer stones like black 'cuddapah.’ They use the latest grinders, polishing tools and polish material to arrive at the right finish from high shine to dull.

16 Image

Terracotta

Frazer& Haws terracotta craftsmen use special clay brought from Kolkata to handcraft each and every piece with minute detailing. They use the latest furnaces to bake the product to the exact degree required.

17 Image

Packaging

All Frazer and Haws signature fitted boxes in our trademark red velvet with the F&H hot stamping and the Fleur de Lys silver plated button are manufactured in-house. This enables us to make fitted boxes for any and every product irrespective of size.

Materials We Use

Image

Silver (92.5% Pure)

Image

Terracotta

Image

Stone

Image

Glass

Our Artisans Are Our Legacy

Many of our silversmiths have been with us for decades—some, for generations. Each artisan is trained for years before they’re entrusted with a face, a motif, or a blessing hand.
Their knowledge isn’t just technical—it’s emotional.
They know when a deity’s gaze is too sharp. Or when a curve needs to soften. They feel the form before they shape it.

Image
Image
Image
What makes our craft unique?

The Frazer and Haws Difference

Fusion of Heritage and Innovation

From wax-casting to 3D modeling—we combine age-old methods with modern precision.

No Two Pieces are the same

Every sculpture is hand-finished. Slight variations make each one truly yours.

Emotion-First Design

We don’t chase trends. Our process begins with meaning, purpose, and presence.

Crafted in India, Trusted Worldwide

Our atelier bridges British legacy with Indian mastery—and serves homes across the globe.